5 Most Common Motor Load Types

5 Most Common Motor Load Types

Load profile (speed range, torque and power)

Certain load types are characteristic in the industrial world. Knowing the load profile (speed range, torque and power) is essential when selecting a suitable motor and frequency converter for the application.
Some common load types are shown. There may also be combinations of these types.

1. Constant Torque
2. Quadratic torque
3. Constant power
4. Constant power/torque
5. Starting/breakaway torque demand

1. Constant torque

A constant torque load type is typical when fixed volumes are being handled. For example screw compressors, feeders and conveyors are typical constant torque applications.
Torque is constant and the power is linearly proportional to the speed.

Figure 1 – Typical torque and power curves in a constant torque application

2. Quadratic torque

Quadratic torque is the most common load type. Typical applications are centrifugal pumps and fans. The torque is quadratically, and the power is cubically proportional to the speed.

Figure 2 – Typical torque and power curves in a quadratic torque application

3. Constant power

A constant power load is normal when material is being rolled and the diameter changes during rolling. The power is constant and the torque is inversely proportional to the speed.

Figure 3 – Typical torque and power curves in a constant power application

4. Constant power/torque

This load type is common in the paper industry. It is a combination of constant power and constant torque load types. This load type is often a consequence of dimensioning the system according to the need for certain power at high speed.

Figure 4 – Typical torque and power curves in a constant power/torque application

5. Starting/breakaway torque demand

In some applications high torque at low frequencies is needed. This has to be considered in dimensioning. Typical applications for this load type are for example extruders and screw pumps.

Figure 5 – Typical torque curve in an application where starting torque is needed

Click here for the full article

 

New Servo Cables Withstand High Accelerations

As machine tools get faster and faster, there’s a growing need for high-acceleration servo systems. These servo systems obviously require more robust motors and mechanical components. What’s less obvious is that they also need power and signal cables that have been designed to withstand acceleration-related stresses.


At the IMTS Show next month (Booth E–4624), we’ll have Lapp technical experts on hand to discuss the effects of high acceleration motion on cable lifecycle and performance. We’ll also be showcasing our brand new lineup of high-acceleration servo cables, including ÖLFLEX® SERVO FD 796 CP.

This high-acceleration cable’s features include extra-fine Class 6 copper stranding, polypropylene insulation, non-woven wrapping, tinned copper braiding and a polyurethane jacketing. The cable optionally contains either one or two control pairs.


The new cable supports accelerations in excess of 5g and travel speeds up to 5 m/sec. Travel distances can range up to 100 m. Intended for flexible applications, it has a minimum bend radius of 7.5 x OD.

Other than its outstanding ability to withstand high accelerations, FD 796 CP behaves much like any other high-performance servo cable. It resists oil and flame to UL standards. Temperature range for flexible applications is –40 to 80ºC.


Download out latest whitepaper if you’d like to learn more the cable design challenges that result from high accelerations